Contents
Huayu is a brand that manufactures universal remote controls that are designed to work with a wide range of devices, such as TVs, DVD players, set-top boxes, and other audio/video equipment. Huayu universal remotes are designed to be easy to use and can replace multiple remote controls with a single device.
Some of the features of Huayu universal remotes may include:
- Compatibility with a wide range of devices
- Learning function to program custom commands
- Macro programming to execute multiple commands with a single button press
- Backlit buttons for use in low-light conditions
- Ergonomic design for comfortable use
To use a Huayu universal remote, you need to program it with the codes for the devices you want to control. These Huayu Universal Remote codes can be found in the user manual or on the Huayu website. Once you have programmed the remote, you can use it to control your devices just like you would with the original remote control.
We have three methods to set up Huayu universal remote on our favorite device, you’ll use any of them which is suitable for your device. This one is among the best universal remotes, so we recommend you utilize this remote.
Check also: RCA Universal Remote Codes
Huayu Universal Remote Codes List
- 011, 017, 029, 032, 034, 054, 067, 069, 071, 075, 076, 077, 078, 079, 080, 081, 107, 113, 117.
Try these codes also
- 0028, 0026, 0022.
How to Program Huayu Remote
1) Keycode
By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.
- First, you would like to “Turn The Device On”
- Press the “TV” on your “Huayu Universal Remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat a similar procedure with the various code from a similar part of the reference table.
2) Programming Via Universal Remote Code Search
If you couldn’t find the key code which works for the device at that time you’ll find out your universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three-digit) code
- Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”
The above method might take some additional time but it’s vital to search out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.
3) Manual Setup
If the above two methods can’t help you then the final method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.
- Place the “Remote Control facing To the Universal remote you would like to replace”
- Now press the “Setup Button” or “Magic”
- Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
- Now press any of the functions which you would like to “program” as an example “TV Volume Up”
- Then press And hold the corresponding key on the “Original Remote Controller”
- Finally, one of the lights will “blink” which means it’s been saved correctly
- Now you’re “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
- You have to repeat all the buttons to program, once you’ve got done all the functions which you would like and eventually press the “Setup Button” Again to end the session.
Now operate the Huayu universal remote on your device by using the above universal remote codes. Check to check if the remote features a temporary memory that stores control information for some minutes once you need to change the batteries. Otherwise, you’ll need to reprogram the remote.
FAQs
here are some frequently asked questions about Huayu Universal Remotes along with their answers:
Q: How do I program my Huayu Universal Remote?
A: To program your Huayu Universal Remote, you need to follow these steps:
- Turn on the device you want to program.
- Press and hold the “Set” button on the remote until the indicator light stays on.
- Enter the device code using the number buttons on the remote. You can find the device codes in the user manual or on the Huayu website.
- Release the “Set” button once the device turns off. This indicates that the code has been accepted.
- Test the remote to make sure it is working properly.
Q: Can I program my Huayu Universal Remote to control multiple devices?
A: Yes, you can program your Huayu Universal Remote to control multiple devices. You just need to repeat the programming process for each device you want to control.
Q: How do I reset my Huayu Universal Remote?
A: To reset your Huayu Universal Remote, you need to remove the batteries and press all the buttons on the remote at least once. Then, insert the batteries back into the remote and try programming it again.
Q: What do I do if my Huayu Universal Remote is not working?
A: If your Huayu Universal Remote is not working, here are some things you can try:
- Make sure the batteries are installed correctly and have enough power.
- Make sure you are using the correct device codes for your devices.
- Try resetting the remote (see above).
- Check for any obstructions that may be blocking the signal from the remote.
- Contact Huayu customer support for further assistance.
Q: Can I use my Huayu Universal Remote with a smart TV?
A: Yes, you can use your Huayu Universal Remote with a smart TV. However, you may need to program the remote using different codes or use the learning function to program custom commands. It’s also important to note that some smart TV features may not be accessible through a universal remote.

Kiran Kotte is a 25 years old Youtuber. He is a tech geek and also codes sometimes. He writes on various topics like Technology, Blogging, Web designing, and SEO. He runs various other blogs under various niches.