Magnavox Blu-Ray Universal Remote Codes & Program Instructions

If you are looking for remote codes for your Magnavox Blu-ray Player then below is the list with the known functioning device codes for Magnavox Blu-Ray DVD gamers. These ought to collaborate with any remote as these remote codes are universal. These codes will certainly collaborate with all Magnavox Blu-Ray players consisting of the Smart Network WI-FI prepared designs as well as the Magnavox 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players.

Magnavox Blu-ray Universal Remote Codes

Magnavox Blu-Ray Universal Remote codes list

You may also likeMagnavox Universal Remote Codes and Program Instructions


  • 0731
  • 0800
  • 0666


  • 21354
  • 20646
  • 21506
  • 20539
  • 21177
  • 21472
  • 20503
  • 22229

How to Program 

  • Step 1: Switch on the TV and Make sure that the batteries are operating in the remote.
  • Step 2: Press and hold the TV and also SEL switches at the same time for 3 secs. The switch will certainly light.
  • Step 3: With the button lit, factor the remote at the TV and enter the TV’s 3, 4, or 5 digit code, select equivalent code from the listing provided below.
  • Step 4: Confirm by pushing the Volume + switch. This should turn the TV volume up.
  • Step 5: Press the TV switch to store the 3, 4, or 5 figure code. The switch will certainly blink two times to confirm the code is saved.

Steps to configuration

Here are all the steps for you that you can use it for the configuration of RCA universal remote codes.

  • Step 1: Switch on residence movie theater equipment components or tools like TV, blu-ray that you want to establish with RCA Universal remote.
  • Step 2: Make sure batteries are working in the remote.
  • Step 3: Switch on house cinema equipment components or devices like TV, blu-ray that you intend to establish with RCA Universal remote.
  • Step 4: Press and release the switch that corresponds with the component that you’re establishing. To program the remote to control the TV, hit and also release the TV switch. The on/off switch will illuminate and need to stay lit.
  • Step 5: Next, at the same time press and hold the part button (TV/ Blu-Ray/ DVD) as well as the on/off switch. The illuminated on/off button will certainly switch off. It should transform back on itself.
  • Step 6: Launch both buttons your holding after the on/off switch relights. It should stay on.
  • Step 7: Currently, press and launch the play switch on the remote. If the part that you’re setting does not switch off after 5 secs, remain to hit the play switch every five secs up until the part switches off.
  • Step 8: Currently press and also release the reverse switch. Wait to see if the element turns back on, as well as press it every couple of seconds up until it does.
  • Step 9: Press and release the quit button to conserve the programming for the tool in the remote’s memory.
  • Step 10: Repeat all the steps for every device you want to program.
  • Step 11: There is an unfortunate chance automobile code search might not function, we can make use of direct code entrance technique to manage the scenario.

Leave a Comment