Blu-ray

Here is that the list with the KNOWN working device codes for Onkyo Blu-Ray DVD players. These should work with ANY remote as these remote codes are universal. These codes will work with ALL Onkyo Blu-Ray players including the Smart Network WI-FI ready models and therefore the Onkyo 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players.

Basically, these codes will work with all kinds of Onkyo Blu-Ray players includes, including the smart network wifi ready models and also the onkyo 4k upscaling 2d/3d blu-ray disc & streaming payers.

Onkyo Blu-Ray Universal 4 Digit Remote Codes

• 0722, 0811, 0695, 0696

Onkyo Blu-Ray Universal 5 Digit Remote Codes

• 20627, 20503, 21769, 22147

Now its time to produce the codes and also the best method to program your okyo blu-ray player, so just check the below codes and enter them as per the below-mentioned methods.

By using the keycode we will easily program an Onkyo Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

• First, you would like to “Turn The Device On”
• Press the “TV” on your “Onkyo Blu-Ray Player Universal Remote”
• Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
• Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
• Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
• You can release the “Power Button” whenever the screen switches off

If you couldn’t find the key code which works for the device at that point you’ll set up your Onkyo Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the (three-digit) code
• Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”

Manual Setup

• Place the “Remote Control facing To The Universal remote you would like to replace”
• Now press the “Setup Button” or “Magic”
• Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you would like to “program” as an example “TV Volume Up”
• Then press And hold the corresponding key on the “Original Remote Controller”
• Finally, one among the lights will “blink” meaning it’s been saved correctly
• Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Onkyo Blu-Ray Player and also for your favorite remote. Those methods are used for Onkyo Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this text then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the other users too by posting them in our site.

Basically, the pioneer blu-ray player supports so many universal remote controls, if you’ve got a foreign control with you and if you’re trying to find the codes, then we’re here for you to offer the guidance about the way to program universal remote controls with the pioneer blu-ray players. Also, we provided various sorts of universal remote codes. So inspect now.

The codes which we’re providing below are working for the pioneer blu-ray players regardless of what type it’s, includes the Smart Network WI-FI ready models and therefore the Pioneer 4K Upscaling 2D/3D Blu-Ray Disc & Streaming, Players.

Pioneer Blu-Ray Universal 5 Digit Remote Codes

• 21571, 20571, 22442, 20142, 21460, 21512, 20632, 20631, 20525

Pioneer Blu-Ray Universal 4 Digit Remote Codes

• 0678, 0750, 0837, 0876, 0701, 0702, 0719

Here is that the list with the KNOWN working device codes for Pioneer Blu-Ray DVD players. These should work with ANY remote as these remote codes are universal. These codes will work with ALL Pioneer Blu-ray players including the Smart Network WI-FI ready models and therefore the Pioneer 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players.

By using the keycode we will easily program a Pioneer Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

• First, you would like to “Turn The Device On”
• Press the “TV” on your “Pioneer Blu-Ray Player Universal Remote”
• Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
• Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
• Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
• You can release the “Power Button” whenever the screen switches off

If you couldn’t find the key code which works for the device at that point you’ll found out your Pioneer Blu-Ray Player universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the (three-digit) code
• Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”

We hope the above methods and therefore the codes are worked to program your Pioneer Blu-Ray Player and also for your favorite remote. Those methods are used for Pioneer Blu-Ray Player remote setup.

• Place the “Remote Control facing To The Universal remote you would like to replace”
• Now press the “Setup Button” or “Magic”
• Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you would like to “program” as an example “TV Volume Up”
• Then press And hold the corresponding key on the “Original Remote Controller”
• Finally, one among the lights will “blink” meaning it’s been saved correctly
• Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

If you are feeling good about this text then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.

Are you one among the aspirants from those that would really like to induce the universal remote codes of Marantz blu-ray player? congratulations, you’ve come to the proper place where anybody can get codes for his or her favorite remote controls. So during this blog, we are mentioning all kinds of remote codes like four and five-digit codes and also all other remaining codes too like three-digit codes.

Marantz Blu-Ray Universal 5 Digit Remote Codes

• 20539, 22414

Marantz Blu-Ray Universal 4 Digit Remote Codes

• 0689, 0732, 0666, 0688

First of all, we might wish to provide the codes list then we’ll jump into the programming methods, so allow us to start the procedure to program your remote together with your favorite Marantz blu-ray player.

1) Keycode

By using the keycode we will easily program a Marantz Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

• First, you would like to “Turn The Device On”
• Press the “TV” on your “Marantz Blu-Ray Player Universal Remote”
• Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
• Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
• Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
• You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Marantz Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Marantz Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the (three-digit) code
• Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”

3) Manual Setup

• Place the “Remote Control facing To The Universal remote you would like to replace”
• Now press the “Setup Button” or “Magic”
• Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you would like to “program” for example “TV Volume Up”
• Then press And hold the corresponding key on the “Original Remote Controller”
• Finally, one among the lights will “blink” meaning it’s been saved correctly
• Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Marantz Blu-Ray Player and also for your favorite remote. Those methods are used for Marantz Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this article then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you.

From this post, we’re getting to provide all kinds of universal remote codes which definitely work for Insignia Blu-ray DVD players regardless of the universal remote brand you utilize. So simply follow the below-mentioned instructions of three methods while entering the code either four-digit or five-digit code.

Insignia Blu-Ray Universal 5 Digit Remote Codes

• 22255, 22428, 20675, 21013, 22620, 20741, 22095, 22596

Insignia Blu-Ray Universal 4 Digit Remote Codes

• 0683, 0685, 0727, 0728, 0828

So allow us to reveal the most recent codes which work for any remote. you just got to enter the code, if the code doesn’t work then repeat an equivalent procedure with another code until your remote get programmed together with your insignia blu-ray DVD player.

1) Keycode

By using the keycode we will easily program an Insignia Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

• First, you would like to “Turn The Device On”
• Press the “TV” on your “Insignia Blu-Ray Player Universal Remote”
• Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
• Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
• Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
• You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Insignia Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that time you’ll set up your Insignia Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the (three-digit) code
• Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”

3) Manual Setup

• Place the “Remote Control facing To The Universal remote you would like to replace”
• Now press the “Setup Button” or “Magic”
• Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you would like to “program” as an example “TV Volume Up”
• Then press And hold the corresponding key on the “Original Remote Controller”
• Finally, one among the lights will “blink” meaning it’s been saved correctly
• Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Insignia Blu-Ray Player and also for your favorite remote. Those methods are used for Insignia Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this text then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.

Would you wish to work your Toshiba blu-ray player together with your favorite universal remote control? but unable to do? no problem, we have the answer for it. we’ve all kinds of universal remote codes to program your remote together with your Toshiba player.

Toshiba Blu-Ray Universal 5 Digit Remote Codes

• 10156, 11524, 11656, 21515, 21769, 20041, 20695, 21608, 21008, 21154, 31788, 11704, 10845, 10650, 11356, 10060, 11265, 21503, 21588, 20043, 20209, 21972, 20503, 11156, 20045, 10822, 11256, 12006, 11935, 11945, 21606, 22277, 22006, 10832, 21510

Toshiba Blu-Ray Universal 4 Digit Remote Codes

• 0721

First of all, you would like to form sure that what codes your remote supports other you’ll simply do a manual search as we mentioned below. So allow us to mention the codes either it might be three-digit, four-digit or five-digit and easily enter those sort of codes one by one until your device get programed.

1) Keycode

By using the keycode we will easily program a Toshiba Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

• First, you would like to “Turn The Device On”
• Press the “TV” on your “Toshiba Blu-Ray Player Universal Remote”
• Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
• Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
• Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
• You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Toshiba Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Toshiba Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the (three-digit) code
• Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”

3) Manual Setup

• Place the “Remote Control facing To The Universal remote you would like to replace”
• Now press the “Setup Button” or “Magic”
• Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you would like to “program” as an example “TV Volume Up”
• Then press And hold the corresponding key on the “Original Remote Controller”
• Finally, one among the lights will “blink” meaning it’s been saved correctly
• Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Toshiba Blu-Ray Player and also for your favorite remote. Those methods are used for Toshiba Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this article then please give us a feedback, it’ll give us a boost up to enhance our site and to achieve many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.