Westinghouse Universal Remote Codes & How to Program

Westinghouse universal remote codes: Have you purchased the universal remote for your Westinghouse tv and are you confused to program your tv remote along with your favorite Universal remote then you must have the codes, Once you find the step-by-step instructions to program the remote to figure along with your Westinghouse TV, use the remote codes included on this page.

Westinghouse Universal Remote Codes

If you’ve got recently bought a universal remote and would like the remote codes to work on your Westinghouse TV, we’ve codes below for your TV that are working. These codes will work with all universal remote controls. If the primary doesn’t work keep trying the numbers down the list.

Check also: Spectrum Universal Remote Codes

Westinghouse remote codes list

Westinghouse Universal Remote Codes For Vizio Tv

  • 0143
  • 0002
  • 0114
  • 1146

GE Universal Remote Codes For Westinghouse TV

  • 0143
  • 0114

Check more: Ge Universal Remote Codes

RCA Universal Remote Codes For Westinghouse TV

  • 11282, 13382, 2293, 0885, 12397, 1712, 3470, 10451, 10885, 1036, 11217, 0451, 11300, 0463, 10889, 11712, 13094, 072, 1577, 2397, 1217, 13470, 1282, 12293, 10463, 13579, 0890, 3094, 13949, 13559, 3382, 3559, 13899, 11577, 0889

Magnavox Universal Remote Codes For Westinghouse TV

  • 0127
  • 0112
  • 0049
  • 0046

Check more: Magnavox Universal Remote Codes 

Philips Universal Remote Codes For Westinghouse TV

  • 0915, 0013

Check more: Philips Universal Remote Codes

First, try these Westinghouse codes

  • 0027, 0478, 0912, 0916

Westinghouse Universal 4 Digit Remote Codes

  • 4797, 3411, 1300, 1712, 0143, 0114, 1146, 3241, 3251, 0111, 1901, 2281, 3711, 3851, 5781, 5971, 5981, 1891, 2141, 0885, 0889, 0890, 1282, 1577, 0451, 1217, 1019, 1027, 1195, 1196, 1336, 1414, 1430, 1433, 1367, 1489, 1454, 0002, 0915, 0013, 1216, 5001, 5054, 5115, 5117, 5237, 5379, 1036

Westinghouse Universal 3 Digit Remote Codes

  • 795, 528, 500, 553, 562, 505, 738, 574, 798, 809, 531, 551, 516, 794, 513, 652, 575, 766, 697, 003, 797, 068, 097, 107, 856, 072

Westinghouse Universal 5 Digit Remote Codes

  • 11712, 13579, 13382, 10885, 11300, 13949, 12293, 13094, 13470, 10890, 11282, 12397, 13908, 10451, 10463, 11217, 10000, 10889, 11577, 12499, 12195, 17133, 19016, 18535, 11106, 12824, 12438, 12536

Check them now and program your device remote together with your favorite universal remote then watch your favorite tv shows and also other programs by simply operating with this universal remote.

How to Program Westinghouse TV Universal Remote?

  • From your tv remote Press and Hold the “Mute & Select” options simultaneously until “Two Blinks
  • Now Enter the “9,9,1” code and await “Two Blinks
  • Now “Enter 1
  • Then press and release the “Volume +” button
  • Point the remote “before the tv” and keep it up by pressing and releasing the “CH +” key, whenever the quantity changes
  • Now “Press the Select” choice to lock the code.

1) Keycode

By using the keycode we will easily program a JVC universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “JVC TV Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal JVC Remote Code

If you couldn’t find the key code which works for the device at that time you’ll find out your JVC universal remote to look mode for the proper one. Its a code within the manual that forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the functions which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one of the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the amount button.

This is the only way to program a remote to work with Westinghouse models. See the particular device instructions for an appropriate sequence of keystrokes. Learning remote controls are ready to capture commands from Westinghouse remote controls. Some are limited to one command and others can group commands together.

Check also:  RCA Universal Remote Codes

FAQs (Frequently Asked Questions)

Q1; How To Check If A Westinghouse Remote Is a Universal Remote

  • Ans: To test if your Westinghouse remote is a standard remote, test if it has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

Q2: How to Program Westinghouse Universal Remote Without Codes

  • Ans: In the auto search method, all the universal remote codes are long past via scanning technique in the remote. It scans one code at a time to locate the right remote code that works with your remote to apply the control.

Q3: How to Program Westinghouse Universal Remote With Code Search

  • Ans: If you couldn’t locate the key code which works for the machine at that time you can set up your regular remote to search mode for the right one.

Q4: Do you want the Westinghouse TV remote codes accepted?

  • Ans: Check greater than one code for every device. So if one of the codes doesn’t work, please strive out any other code. Usually, a Westinghouse TV comes with remote control.

Q5: How to set Comcast codes for Westinghouse TV?

  • Ans: Comcast has four-digit Remotes and 5 Digit remotes. The only way to tell, other than coming into codes, is to look at the core button labeled “OK / Select.” If it is Red, it is a 5 digit remote.

Leave a Comment