If you’re looking for Konka TV universal remote codes, we’ve got you covered. Universal remote codes are specific numeric sequences that allow you to control various devices, including Konka TVs, using a single remote control. By entering the correct code into your universal remote, you can effortlessly operate your Konka TV without the need for its original remote.
For Konka TV users we are getting to provide all kinds of universal remote codes, you’ll enter the code on your universal remote, then the remote is going to be found to program your Konka tv. There are various sorts of codes like three-digit, four-digit, five-digit, and so on.
Check also: RCA Universal Remote Codes
Konka TV Universal Remote Codes
To program your Konka TV together with your favorite universal remote we’ve mentioned three methods, you would like to gather the remote code from the table and then follow the methods whatever is suitable for your remote. Enjoy all the shows and films after finishing the programming.
Konka TV Code For RCA Universal Remote
Konka TV Code For VIZIO Universal Remote
- 0047, 0016, 0053, 0413, 0029, 0066, 0412, 0011, 0103
Konka TV Universal 3 Digit Remote Codes
- 753, 526, 510, 671, 515, 744, 516, 011, 012, 013, 016, 047, 053, 066, 157, 158, 176, 412, 413
Konka TV Universal 5 Digit Remote Codes
- 11385, 10632, 10638, 10707, 11831, 11939, 10628, 11940, 10467, 12419, 15162, 14450, 14700, 16719, 11223, 11922, 15203, 17500, 12422, 13729, 16244, 19041, 19740
Konka TV Universal 4 Digit Remote Codes
- 0037, 0556, 0714, 0371, 0587, 0754, 0606, 0418, 0218, 1385, 0053, 0011, 0016, 0047, 0066, 0103, 0412, 0413, 0029, 5441, 0471, 0521, 0751, 1241, 1671, 2121, 2191, 2241, 2371, 4621, 4901, 4971, 6181, 5891, 1341, 0628, 0632, 0638, 0703, 0707, 0906, 0702, 0203, 0306, 0208, 0911, 0842, 0942, 0504, 5041, 5045, 5062, 5073, 5157, 5161, 5173, 5189, 5228, 5322
There are three simple ways to set up or configure a universal remote and therefore the first one is using a Keycode, Programming Via universal remote code for Konka Tv Search, and Manual Setup.
How to Program
By using the keycode we will easily program a Konka universal remote and therefore the keycode identifies the make and model of your equipment.
- First, you would like to “Turn The Device On”
- Press the “TV” on your “Universal Konka Remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then the “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
2) Programming Via Universal Konka Remote Code
If you couldn’t find the key code which works for the device at that point you’ll find out your Konka universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the (three-digit) code
- Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”
3) Manual Setup
- Place the “Remote Control facing To The Universal remote you would like to replace”
- Now press the “Setup Button” or “Magic”
- Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
- Now press any of the functions which you would like to “program” as an example “TV Volume Up”
- Then press And hold the corresponding key on the “Original Remote Controller”
- Finally, one of the lights will “blink” which means it’s been saved correctly
- Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
Looking for 3-digit remote codes for your television? Here you’ll find universal remote codes for TVs. If the TV you’re programming requires a 3-DIGIT REMOTE code, find your TV brand below and kind it into the remote. When programmed correctly, the TV will now work together with your universal remote. Here is the list with the entire three-digit device codes for TV.
Q: What are Konka TV universal remote codes?
A: Konka TV universal remote codes are specific numeric sequences that allow you to program a universal remote control to operate your Konka TV. By entering the correct code, you can control various functions of your TV, such as power, volume, channels, and input selection.
Q: How do I find the Konka TV universal remote codes for my specific model?
A: The Konka TV universal remote codes can vary depending on the model and brand of your universal remote. Here are a few methods to find the codes:
- User Manual: Check the user manual of your universal remote control. It usually includes a list of codes for different TV brands, including Konka.
- Online Resources: Visit the manufacturer’s website of your universal remote or Konka’s official website. They may provide a searchable database or a list of codes for various models.
- Code Search Function: Some universal remotes have a built-in code search function. Follow the instructions in your universal remote’s user manual to activate the code search mode and let it automatically find the correct code for your Konka TV.
Q: Can I use a universal remote to control all functions of my Konka TV?
A: A universal remote can usually control basic functions like power, volume, and channel selection on most Konka TVs. However, certain advanced features or settings may not be accessible through a universal remote. For complete control over all features, it’s recommended to use the original remote that came with your Konka TV.
Q: How do I program a universal remote with Konka TV universal remote codes? A: The programming process may vary depending on the brand and model of your universal remote. However, the general steps are as follows:
- Turn on your Konka TV manually.
- Locate the code programming button on your universal remote (often labeled as “Code,” “Setup,” or “Program”).
- Press and hold the code programming button until the indicator light turns on.
- Enter the Konka TV universal remote code for your specific model using the numeric keypad on the remote.
- Release the code programming button and test the remote by pressing various buttons to ensure they are functioning correctly.
- If the remote doesn’t work, repeat the steps using a different code from the list until you find the correct one.
Q: What should I do if I can’t find the Konka TV universal remote code for my model?
A: If you have exhausted all the available Konka TV universal remote codes and still can’t find one that works, you can try the following alternatives:
- Code Search: Use the code search function on your universal remote to automatically scan and find the correct code for your Konka TV.
- Learning Function: Some advanced universal remotes have a learning function that allows them to learn commands directly from the original Konka TV remote. Follow the instructions in your universal remote’s user manual to set up the learning function.
- Contact Support: Reach out to the manufacturer of your universal remote or Konka’s customer support for assistance. They may have additional codes or troubleshooting steps to help you program your remote successfully.
Remember to consult the user manual of your specific universal remote for detailed programming instructions and further troubleshooting options.
Kiran Kotte is a 25 years old Youtuber. He is a tech geek and also codes sometimes. He writes on various topics like Technology, Blogging, Web designing, and SEO. He runs various other blogs under various niches.