Hitachi TV Universal Remote Codes and Program Instructions

Get the universal remote codes list for your favorite Hitachi brands like DVDs, amplifiers and receivers…etc regardless of the brand you utilize which has come from the Hitachi family just check your device name within the below list and obtain the universal remote codes.

Hitachi Tv 4 Digit Universal Remote Codes List

TV 4 Digit Codes
1004
1009
1010
1013
1053
1057
1058
1065
1078
1083
1113
1114
1115
1128
1173
1004
1011
1012
1051
1052
1084
1086
1087
1102
1225
1384

Hitachi DVD Universal Codes List

Hitachi DVD Codes
2000
2027
2126
2173
2240
Hitachi Amplifier Codes
6034
Hitachi HDTV Codes
1030
1132
1133
1134
1191
1208
1209
1210
1211
1212
1226
Hitachi VCR Codes
3052
3055
3117
3169
Hitachi Receiver Tuner Codes
5159

1) Keycode

By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Hitachi Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat a similar procedure with the various code from a similar a part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn’t find the key code which works for the device at that point you’ll set up your universal remote to look mode for the proper one. Its a code within the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

The above method might take some additional time but it’s important to search out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.

3) Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” which means it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
  • You have to repeat for all the buttons to program, once you’ve got done all the functions which you would like and eventually press the “Setup Button” Again to end the session.

Conclusion:

We have mentioned all the remote codes for this Hitachi brand, we also mentioned the steps to program your device with the universal remote. to induce the code for your device to continue your universal remote then operate your favorite channel.

Pavy Universal Remote Codes and Program Instructions

Pavy Universal remote various codes for various devices like insignia, Vizio, element tv…etc now we are getting to mention those universal remote codes and you’ll collect them within the below table. If you don’t skills to program your pavy universal remote for your device then you would like to do the below methods then you’ll easily operate your device.

Pavy Universal Remote Codes List

BrandCodes
Admiral500, 501, 610, 614, 615,902
Advent911, 932, 933
Aiko900
Akai601
AOC103, 601, 617
Apex000, 604, 618
Audiovox100, 101, 900, 901
Belcor617
Bell&Howell611, 620
Bradford901
Brockwood617
Broksonic614, 902
Candle601, 619
Celebrity605
Changhong618
Citizen601, 619, 900, 903
Clairtone103
Concerto619
Contec103, 901
Craig901
Crosley301, 303
Crown901
Curtis Mathes100, 102, 301, 400, 401, 402, 405, 500, 603, 606, 611, 619, 620, 621, 903
CXC901
Daewoo100, 101, 617, 900
Daytron617
Dumont617, 700
Durabrand201, 614, 615, 914, 918
Electroband103, 605
Emerson101, 103, 200, 201, 620, 901, 902
Envision601
ESA201, 601, 901, 903
Fisher620, 801
Fujitsu300, 615
Funai201, 615, 901
Futuretec901
GE100, 200, 202, 400, 401, 402, 405, 607, 608, 802
Gibralter601, 617, 700
Goldstar601, 607, 617, 619
Grundy615, 901
Haier914, 918
Hallmark607
Harvard901
Hitachi005, 606, 611, 916, 619
ILO921, 925
Infinity301
Inteq700
Insignia201, 301, 303, 614, 909, 919, 920, 934
JBL000, 301, 604, 618
JCB605
JC Penny202, 400, 402, 405, 601, 607, 608, 609, 617, 800, 903
JVC701
KEC901
Kenwood601, 617
KLH618
KTV103, 601, 901
Konka001, 002, 003, 304, 904
LG619, 700, 910
Logik611
Luxman619
LXI301, 400, 402, 607, 609, 620
Magnavox301, 302, 303, 601, 615, 617, 803, 905, 906, 907, 908, 909
Majestic611
Marantz301, 601
Matsushita004,
Megatron606, 607
MEI103
Memorex004, 104, 607, 611, 614, 615, 620
MGA104, 500, 601, 607, 617
Minutz608
Mitsubishi104, 500, 601, 607, 617
Motorola500, 802
MTC103, 601, 617, 619, 903
Multitech901
NAD603, 607, 609
NEC601, 617, 619
Nikko601, 607, 900
Noshi800
NTC900
Olevia923
Onwa901
Optimus004, 603, 620
Optonica500, 610
Orion614, 615, 902
Panasonic004, 202, 610, 802
Philips301, 601, 617, 803, 905, 906, 907, 908, 909
Philco301, 601, 606, 614, 617
Pilot601, 617
Pioneer600, 603
Polaroid400, 910, 913, 915, 917, 920
Portland617, 900
Prism202
Proscan400, 402
Proton102, 607
Pulsar617, 700
Quasar004, 202, 610, 802
RadioShack400, 402, 607, 610, 617, 619, 620, 621, 901
Rhapsody103
Roomconx614, 615, 902, 924
Runco601, 616, 700
Sampo601
Samsung601, 607, 617, 619, 903, 930
Sansui614, 615, 902
Sanyo620, 801, 931
Scotch607
Scott607, 615, 617, 901, 902
Sears201, 301, 400, 402, 607, 609, 615, 620, 622, 801
Sharp500, 501, 610, 929
Sharp (LCD)500, 501, 610, 929
Shogun617
Signature611
Simpson803
Sony605
Soundesign607, 615, 901
Squareview201
SSS617, 901
Starlite901
Supreme605
Sylvaina201, 301, 601, 901
Symphonic201, 901
Tandy500
Tatung802
Technics004, 202
Techwood202, 619
Teknika104, 301, 605, 611, 615, 617, 619, 900, 901
TMK602, 607, 619
Toshiba609, 613, 620, 903
Trutech101
Victor701
Vidtech607, 617
Vizio927
Wards301, 601, 607, 608, 610, 611, 615, 617, 619
Westinghouse926, 928
White Westinghouse101, 605, 614
Yamaha601, 617
Zenith611, 614, 619, 700, 900

1) Keycode

By using the keycode we will easily program a universal remote and also the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Pavy Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat a similar procedure with the various code from a similar a part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn’t find the key code which works for the device at that point you’ll set up your universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

The above method might take some additional time but it’s vital to search out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.

3) Manual Setup

If the above two methods can’t be helped to you then the ultimate method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” for example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
  • You have to repeat for all the buttons to program, once you’ve got done all the functions which you would like and at last press the “Setup Button” Again to end the session.

 

We hope you’ve got found out your pavy universal remote for your device. If you couldn’t operate this remote then try and created the pavy universal remote with other codes then the remote are working smoothly without giving any sorts of interruptions.

Huayu Universal Remote Codes and Program Instructions

We have three methods to setup huayu universal remote on our favorite device, you’ll use any of them which is suitable for your device. This one among the best universal remotes, so we recommend you utilize this remote.

Huayu Universal Remote Codes List

  • 011, 017, 029, 032, 034, 054, 067, 069, 071, 075, 076, 077, 078, 079, 080, 081, 107, 113, 117.

Try these codes also

  • 0028, 0026, 0022.

1) Keycode

By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Huayu Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat a similar procedure with the various code from a similar a part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn’t find the key code which works for the device at that time you’ll found out your universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

The above method might take some additional time but it’s vital to search out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.

3) Manual Setup

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.

  • Place the “Remote Control facing To the Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” which means it’s been saved correctly
  • Now you’re “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
  • You have to repeat for all the buttons to program, once you’ve got done all the functions which you would like and eventually press the “Setup Button” Again to end the session.

Now operate the huayu universal remote on your device by using the above universal remote codes. Check to check if the remote features a temporary memory that stores control information for some minutes once you need to change the batteries. Otherwise, you’ll need to reprogram the remote.

Onkyo Blu-Ray Universal Remote Codes and Program Instructions

Here is that the list with the KNOWN working device codes for Onkyo Blu-Ray DVD players. These should work with ANY remote as these remote codes are universal. These codes will work with ALL Onkyo Blu-Ray players including the Smart Network WI-FI ready models and therefore the Onkyo 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players.

Basically, these codes will work with all kinds of Onkyo Blu-Ray players includes, including the smart network wifi ready models and also the onkyo 4k upscaling 2d/3d blu-ray disc & streaming payers.

Onkyo Blu-Ray Universal 4 Digit Remote Codes

  • 0722, 0811, 0695, 0696

Onkyo Blu-Ray Universal 5 Digit Remote Codes

  • 20627, 20503, 21769, 22147

Now its time to produce the codes and also the best method to program your okyo blu-ray player, so just check the below codes and enter them as per the below-mentioned methods.

By using the keycode we will easily program an Onkyo Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Onkyo Blu-Ray Player Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

If you couldn’t find the key code which works for the device at that point you’ll set up your Onkyo Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Onkyo Blu-Ray Player and also for your favorite remote. Those methods are used for Onkyo Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this text then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the other users too by posting them in our site.

Pioneer Blu-Ray Universal Remote Codes and Program Instructions

Basically, the pioneer blu-ray player supports so many universal remote controls, if you’ve got a foreign control with you and if you’re trying to find the codes, then we’re here for you to offer the guidance about the way to program universal remote controls with the pioneer blu-ray players. Also, we provided various sorts of universal remote codes. So inspect now.

The codes which we’re providing below are working for the pioneer blu-ray players regardless of what type it’s, includes the Smart Network WI-FI ready models and therefore the Pioneer 4K Upscaling 2D/3D Blu-Ray Disc & Streaming, Players.

Pioneer Blu-Ray Universal 5 Digit Remote Codes

  • 21571, 20571, 22442, 20142, 21460, 21512, 20632, 20631, 20525

Pioneer Blu-Ray Universal 4 Digit Remote Codes

  • 0678, 0750, 0837, 0876, 0701, 0702, 0719

Here is that the list with the KNOWN working device codes for Pioneer Blu-Ray DVD players. These should work with ANY remote as these remote codes are universal. These codes will work with ALL Pioneer Blu-ray players including the Smart Network WI-FI ready models and therefore the Pioneer 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players.

By using the keycode we will easily program a Pioneer Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Pioneer Blu-Ray Player Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

If you couldn’t find the key code which works for the device at that point you’ll found out your Pioneer Blu-Ray Player universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

We hope the above methods and therefore the codes are worked to program your Pioneer Blu-Ray Player and also for your favorite remote. Those methods are used for Pioneer Blu-Ray Player remote setup.

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

If you are feeling good about this text then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.

Marantz Blu-Ray Universal Remote Codes and Program Instructions

Are you one among the aspirants from those that would really like to induce the universal remote codes of Marantz blu-ray player? congratulations, you’ve come to the proper place where anybody can get codes for his or her favorite remote controls. So during this blog, we are mentioning all kinds of remote codes like four and five-digit codes and also all other remaining codes too like three-digit codes.

Marantz Blu-Ray Universal 5 Digit Remote Codes

  • 20539, 22414

Marantz Blu-Ray Universal 4 Digit Remote Codes

  • 0689, 0732, 0666, 0688

First of all, we might wish to provide the codes list then we’ll jump into the programming methods, so allow us to start the procedure to program your remote together with your favorite Marantz blu-ray player.

1) Keycode

By using the keycode we will easily program a Marantz Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Marantz Blu-Ray Player Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Marantz Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Marantz Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” for example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Marantz Blu-Ray Player and also for your favorite remote. Those methods are used for Marantz Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this article then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you.

Insignia Blu-Ray Universal Remote Codes and Program Instructions

From this post, we’re getting to provide all kinds of universal remote codes which definitely work for Insignia Blu-ray DVD players regardless of the universal remote brand you utilize. So simply follow the below-mentioned instructions of three methods while entering the code either four-digit or five-digit code.

Insignia Blu-Ray Universal 5 Digit Remote Codes

  • 22255, 22428, 20675, 21013, 22620, 20741, 22095, 22596

Insignia Blu-Ray Universal 4 Digit Remote Codes

  • 0683, 0685, 0727, 0728, 0828

So allow us to reveal the most recent codes which work for any remote. you just got to enter the code, if the code doesn’t work then repeat an equivalent procedure with another code until your remote get programmed together with your insignia blu-ray DVD player.

1) Keycode

By using the keycode we will easily program an Insignia Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Insignia Blu-Ray Player Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Insignia Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that time you’ll set up your Insignia Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Insignia Blu-Ray Player and also for your favorite remote. Those methods are used for Insignia Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this text then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.

Toshiba Blu-Ray Universal Remote Codes and Program Instructions

Would you wish to work your Toshiba blu-ray player together with your favorite universal remote control? but unable to do? no problem, we have the answer for it. we’ve all kinds of universal remote codes to program your remote together with your Toshiba player.

Toshiba Blu-Ray Universal 5 Digit Remote Codes

  • 10156, 11524, 11656, 21515, 21769, 20041, 20695, 21608, 21008, 21154, 31788, 11704, 10845, 10650, 11356, 10060, 11265, 21503, 21588, 20043, 20209, 21972, 20503, 11156, 20045, 10822, 11256, 12006, 11935, 11945, 21606, 22277, 22006, 10832, 21510

Toshiba Blu-Ray Universal 4 Digit Remote Codes

  • 0721

First of all, you would like to form sure that what codes your remote supports other you’ll simply do a manual search as we mentioned below. So allow us to mention the codes either it might be three-digit, four-digit or five-digit and easily enter those sort of codes one by one until your device get programed.

1) Keycode

By using the keycode we will easily program a Toshiba Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Toshiba Blu-Ray Player Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Toshiba Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Toshiba Blu-Ray Player universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Toshiba Blu-Ray Player and also for your favorite remote. Those methods are used for Toshiba Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this article then please give us a feedback, it’ll give us a boost up to enhance our site and to achieve many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.

Sharp Aquos Blu-ray Player Universal Remote Codes and Program Instructions

We have mentioned all kinds of Sharp Aquos Blu-Ray Player Universal Remote Codes, if you would like those codes then check them from the below lines we’ve mentioned 3 digits and also 4 digit codes, so once check them from the below lines and obtain your blu-ray programmed with the universal remote.

Sharp Aquos Blu-ray Player 3 Digit Universal Remote Codes

  • 206, 207, 222, 226, 227, 234, 239, 242, 246, 248, 254, 266, 268, 273, 274, 275, 280, 285, 287, 300, 340, 341, 360, 361

Sharp Aquos Blu-ray Player 4 Digit Universal Remote Codes

  • 2250, 0679, 0689, 0397, 0897, 0908

If you discover any of the codes that don’t work on your remote, then allow us to know through the below comment section, we’ll give some suggestions about the codes. So be happy to ask us and obtain the solutions as soon as possible.

1) Keycode

By using the keycode we will easily program a pointy Aquos Blu-Ray Player universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Sharp Aquos Blu-Ray Player Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Sharp Aquos Blu-Ray Player Remote Code

If you couldn’t find the key code which works for the device at that point you’ll found out your Sharp Aquos Blu-Ray Player universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Sharp Aquos Blu-Ray Player and also for your favorite remote. Those methods are used for the Sharp Aquos Blu-Ray Player remote setup.

Conclusion:

If you are feeling good about this article then please give us a feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants those that are expecting their remote codes, we also accept new universal remote codes those are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.

Supersonic DVD Universal Remote Codes

If you wanna program your Supersonic DVD player together with your favorite universal remote then check out the below-mentioned programming methods and you furthermore may get to use the codes.

This Supersonic DVD universal remote has designed for six different types of components by simply using a single device like 1) it can compatible with TV’s, Cable, Satellite, DVD, Audio and VCR, 2) it’s automatic code search, 3) also large keys for easy use, 4) Info, Menu, Input, Clear Preview Chapter and Next Chapter Keys 5) Advanced DVD Functions 6) Battery Type: 2 x AA ( not included).

Supersonic DVD Universal Remote 4 Digit Codes List

  • 0208, 0556, 0698, 0264, 0805, 0096

By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Supersonic DVD Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off
  • That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat an equivalent procedure.

If you couldn’t find the key code which works for the device at that point you’ll set up your universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

The above method might take some overtime but it’s vital to search out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.

If the above two methods can’t be helped to you then the ultimate method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

You have to repeat for all the buttons to program, once you’ve got done all the functions which you would like and eventually press the “Setup Button” Again to end the session.