Supersonic TV’s universal remote is a remote control that is designed to work with a variety of different devices, including TVs, DVD players, cable boxes, and other audio/video equipment. It is called “universal” because it can be programmed to work with a wide range of brands and models, instead of being limited to only one specific device. This allows users to control all of their home entertainment equipment with a single remote control, making it more convenient and easy to use.
To control your Supersonic TV with the Universal remote we’ve mentioned programming instructions with three methods you’ll program as soon as possible by using the codes that are mentioned below the table.
Check also: Supersonic DVD Universal Remote Codes
Table of Contents
Supersonic Tv’s Universal remote codes
If you discover any of these universal remote codes haven’t been working properly for your remote regardless of the brand it’s, then attempt to use the choice codes then your supersonic tv is going to be programmed with the universal remote therewith code.
Supersonic 4 Digit Universal Remote Codes
- 1421, 0208, 5330, 0556, 0698, 3595, 0944, 0455, 4701, 0241, 0096.
Supersonic 5-Digit Universal Remote Codes
- 11125, 13595, 12424, 17048, 12104, 15322, 13593, 21354, 13135, 13154, 13877, 22321, 13894, 13204, 14421, 11753, 11233
How to Program Supersonic Tv’s remote
There are three simple ways to set up or configure a universal remote and therefore the first one is using a Keycode, Programming Via universal remote code for Supersonic Tv Search, and Manual Setup.
- Switch on “Supersonic TV”
- Up to “3 Seconds” you would like to press and hold the “TV and also SEL” buttons then it’ll be lighting
- With the “lit” button you would like to point the remote before your TV screen then enter “TV’s 4 Digit Code”
- Now you’ve got to “Verify” by pressing on “Volume+” button
- Then click on the “TV Button” to store this “Four Digit Universal Code”
- Finally, the “Button” will blink twice meaning “The Code is Stored”
By using the keycode we will easily program a Supersonic TV universal remote and therefore the keycode identifies the make and model of your equipment.
- First, you would like to “Turn The Device On”
- Press the “TV” on your “Universal Supersonic TV Remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then the “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
If you couldn’t find the key code which works for the device at that point you’ll find out your Supersonic TV universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the (three-digit) code
- Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”
Manual Setup
- Place the “Remote Control facing To The Universal remote you would like to replace”
- Now press the “Setup Button” or “Magic”
- Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
- Now press any of the functions which you would like to “program” as an example “TV Volume Up”
- Then press And hold the corresponding key on the “Original Remote Controller”
- Finally, one of the lights will “blink” meaning it’s been saved correctly
- Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
If you found the above three methods didn’t work for your universal remote then use the below method it’d be helpful to you, to use a similar universal remote code that we mentioned above.
FAQs
Here are some frequently asked questions and detailed information about Supersonic TV’s universal remote codes:
Q1: What are Supersonic TV’s universal remote codes?
Supersonic TV’s universal remote codes are a set of numeric codes that are used to program the remote control to work with a specific device. Each brand and model of equipment has a unique code, which allows the remote to communicate with and control the device.
Q2: How do I find the correct code for my device?
To find the correct code for your device, you can refer to the user manual that came with your remote control. The manual should include a list of codes for different brands and models of equipment. You can also visit the Supersonic website or contact their customer support for assistance.
Q3: How do I program my Supersonic TV’s universal remote?
To program your Supersonic TV’s universal remote, you will need to follow these steps:
- Turn on the device you want to program.
- Press and hold the “Set” button on the remote control until the LED light flashes.
- Enter the code for your device using the numeric keypad on the remote.
- The LED light will flash again to confirm that the code has been entered correctly.
- Test the remote to see if it controls the device properly. If not, repeat the process with a different code.
Q4: What if the code doesn’t work for my device?
If the code doesn’t work for your device, you can try searching for the code using the “Code Search” function on the remote control. This will allow the remote to automatically search for a code that will work with your device. If this doesn’t work, you may need to contact Supersonic customer support for assistance.
Q5: Can I program multiple devices with my Supersonic TV’s universal remote?
Yes, you can program multiple devices with your Supersonic TV’s universal remote. Simply follow the same programming process for each device, using the appropriate code for each one. You can then switch between devices using the “Device” button on the remote control.
Kiran Kotte is a 25 years old Youtuber. He is a tech geek and also codes sometimes. He writes on various topics like Technology, Blogging, Web designing, and SEO. He runs various other blogs under various niches.