Devant TV’s Universal Remote Codes and Program Instructions

Devant TV’s Universal Remote comes with a list of codes that you can use to program the remote to work with your TV or other devices. These codes are essentially pre-programmed commands that tell the remote how to communicate with your device.

To use any of your favorite universal remotes for your Devant tv, you would like to program with the universal remote codes. The codes have been mentioned within the below lines and you’ll enter those codes in your device as per the below-mentioned steps. So try those codes like two-digit codes, three, four, and also five-digit codes.

Each device has a unique set of codes that you can use to program the remote. For example, if you have a Samsung TV, you would use the codes for Samsung TVs to program the remote to work with your TV. These codes are typically a series of numbers or a combination of numbers and letters that you enter into the remote using the number pad.

When you enter a code into the remote, you are essentially telling it which commands to send to your device when you press a button on the remote. For example, when you press the “Power” button, the remote sends a signal to turn your TV on or off. The code you entered tells the remote which signal to send for your specific TV brand and model.

If the codes provided with the remote don’t work with your device, you can try using the “Search Method” to find the right code. This method involves the remote sending out every code in its database until it finds the right one that works with your device. Overall, understanding how Devant TV’s Universal Remote codes work is important in order to properly program the remote and ensure that it can communicate with your device effectively.

Check also: RCA Universal Remote Codes

Devant tv’s Universal Remote Codes

Devant tv's universal remote codes & How to Program

Devant TV’s Universal Remote 3 Digit Codes List

  • 024

Devant TV’s Universal Remote 4 Digit Codes List

  • 0102, 0134, 0193, 0195, 0196, 0214, 0231, 0338, 0349, 0355, 0384, 0416, 0456, 0457, 0460, 0472, 0476, 0477, 0509, 0526

Devant TV’s Universal Remote 5 Digit Codes List

  • 00001
  • 00002

Program Instructions

Here are remote codes to use together with your Devant TV. Program Your Cable or Satellite remote to figure together with your Devant TV. you’ll program your cable or satellite universal remote to also control your Devant TV. ask your cable or satellite provider for instructions.

1) Keycode

By using the keycode we will easily program a Devant universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Devant TV Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Devant Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Devant universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the functions which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one of the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
  • We hope the above methods and therefore the codes are worked to program your Devant tv and also for your favorite remote.


If your device is still not programmed with the universal remote, then be happy to ask us your issue question, and our experts will solve it as soon as possible, many thanks for visiting our blog, and keep visiting our official site to urge updates whenever we post new articles.

Check alsoSenzu TV Universal Remote Codes


Q: How do I program my Devant TV’s Universal Remote to work with my TV?

A: To program your remote, first make sure your TV is turned on. Then, hold down the “Set” button on the remote until the LED light blinks twice. Enter the code for your TV brand (you can find the codes in the instruction manual or on Devant’s website) and press the “Power” button. If your TV turns off, the remote has been successfully programmed.

Q: What should I do if the programmed codes don’t work with my TV?

A: If the codes provided don’t work, try the “Search Method.” With the TV turned on, hold down the “Set” button until the LED light blinks twice. Then, press the “Power” button and begin pressing the “CH+” button repeatedly until the TV turns off. Once it turns off, press the “Set” button to save the code.

Q: How do I change the batteries in my Devant TV’s Universal Remote?

A: First, locate the battery compartment on the back of the remote. Open it by pressing down on the tab and pulling the cover off. Then, remove the old batteries and replace them with two new AAA batteries. Make sure to put them in with the correct polarity (+/-) and then snap the cover back into place.

Q: Can I use my Devant TV’s Universal Remote with other devices besides my TV?

A: Yes, you can use the remote with other devices like DVD players, cable boxes, and soundbars. Just follow the same programming steps as you would for your TV, but use the codes for the other device instead.

Q: How do I reset my Devant TV’s Universal Remote to its default settings?

A: To reset the remote, hold down the “Set” button until the LED light blinks twice. Then, enter the code “981” and press the “Power” button. The remote will reset to its default settings.

Leave a Comment