Telefunken TV Universal Remote Codes and Program Instructions


For Telefunken tv we’ve many universal remote codes, if you would like to program your favorite remote together with your Telefunken tv then you ought to use the below codes either three-digit codes or four-digit codes you’ll check them below.

We also are providing the methods to program your remote together with your tv and you’ll check them now to program your device and also the remote. So why late get the codes and enter them now.

Telefunken TV Universal Remote 3 Digit Codes

  • 067, 075, 098, 132, 133, 134, 135, 140, 185, 186, 231, 235

Telefunken TV Universal Remote 4 Digit Codes

  • 1033, 1069, 1101, 0651, 1102, 1104, 1105, 1107, 1108, 1109, 1113, 1136, 1140, 1181, 1196, 1197, 1198, 1199, 1200, 1201, 1202, 1204, 1404, 1412, 1435, 1469, 1470, 1472, 1477, 1522, 1523, 1568, 1572, 1648, 1650, 1652, 1658, 1661, 1686, 1702, 1717, 1719, 1734, 1740, 1756, 1757, 1765, 1766, 1773, 1850, 1855, 1866

How to Program Telefunken TV Universal Remote?

  • Turn on” your tv and “Press & Hold” the tv key then “Enter codes” which are suitable for your brand
  • Your “TV is going to be Turned Off” once you enter the proper code meaning you’re found out has been completed.

Note: If your TV doesn’t close up then repeat the procedure with other codes. alternatively, you’ll also check the choice methods too.

1) Keycode

By using the keycode we will easily program a Telefunken universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Telefunken TV Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then the “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Telefunken Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Telefunken universal remote to look mode for the right one. Its a code in the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the functions which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one among the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
  • We hope the above methods and therefore the codes are worked to program your Telefunken tv and also for your favorite remote. Those methods are used for Telefunken remote setup.


We are concluding with a note, if you would like codes for your Telefunken tv universal remote then leave a comment below, and that we will update them whenever we discover them. many thanks for visiting our website.


Leave a Comment