Hitachi TV Universal Remote Codes and How to Program Instructions

If you’re looking for universal remote codes for your Hitachi TV, you’ve come to the right place. Here is a list of Hitachi TV universal remote codes that can be used to program your remote control for seamless operation

Get the universal remote codes list for your favorite Hitachi brands like DVDs, amplifiers and receivers…etc regardless of the brand you utilize which has come from the Hitachi family just check your device name within the below list and obtain the universal remote codes.

Check also: Remote Control Codes For DIRECTV

Hitachi Tv Universal Remote Codes

hitachi TV Universal remote codes and how to prorgam

Hitachi Tv 4 Digit Universal Remote Codes List

TV 4 Digit Codes

These codes are compatible with various Hitachi TV models and offers convenient control options. Simply enter this code into your universal remote to sync it with your Hitachi TV and enjoy hassle-free operation.

Hitachi DVD Universal Codes List

Hitachi DVD Codes
Hitachi Amplifier Codes
Hitachi HDTV Codes
Hitachi VCR Codes
Hitachi Receiver Tuner Codes

Remember to consult your universal remote’s user manual or manufacturer’s website for specific instructions on how to program the remote using these codes. Additionally, make sure to try different codes if the first one doesn’t work, as compatibility may vary based on the model of your Hitachi TV and the universal remote you are using.

By utilizing these universal remote codes, you can easily control your Hitachi TV and enjoy a seamless viewing experience from the comfort of your couch.

How to Program Hitachi TV Remote

1) Keycode

By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Hitachi Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat a similar procedure with the various code from a similar part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn’t find the key code which works for the device at that point you’ll set up your universal remote to look mode for the proper one. Its a code within the manual that forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

The above method might take some additional time but it’s important to search out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.

3) Manual Setup

If the above two methods can’t be helpful to you then the final method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the functions which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one of the lights will “blink” which means it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
  • You have to repeat all the buttons to program, once you’ve got done all the functions which you would like and eventually press the “Setup Button” Again to end the session.


We have mentioned all the Hitachi remote codes for this Hitachi brand, we also mentioned the steps to program your device with the universal remote. to induce the code for your device to continue your universal remote then operate your favorite channel.


Q: How do I program my universal remote with Hitachi TV codes?

A: The process may vary depending on the brand and model of your universal remote. However, the general steps to program your remote with Hitachi TV codes are as follows:

  1. Turn on your Hitachi TV manually.
  2. Find the code list for your universal remote. It is usually provided in the user manual or available online.
  3. Press and hold the “Setup” or “Code Search” button on your remote until the indicator light turns on.
  4. Enter the appropriate Hitachi TV code using the number pad on your remote. You can find the code in the list provided.
  5. Press the “Power” button on the remote and check if your TV turns off. If it does, the code has been successfully programmed.
  6. Test other functions like volume control or channel navigation to ensure full functionality.

Q: What if the provided codes don’t work with my Hitachi TV?

A: If the initial codes don’t work, don’t worry. Try the following troubleshooting steps:

  • Repeat the programming process, ensuring that you enter the correct code.
  • Check for any alternative codes in the manual or online resources specific to your universal remote model.
  • Try a code search method on your universal remote. Follow the instructions in the user manual to activate the code search mode, and the remote will automatically search for the correct code.
  • Contact the manufacturer of your universal remote for further assistance or additional codes.

Q: Are there different codes for different Hitachi TV models?

A: Yes, different Hitachi TV models may require different remote codes. It’s essential to consult the code list specific to your universal remote model to find the appropriate code for your Hitachi TV.

Q: Where can I find the code list for my universal remote?

A: The code list is typically included in the user manual that came with your universal remote. If you don’t have the manual, you can often find it on the manufacturer’s website. Alternatively, you can search for the specific model of your universal remote along with the term “code list” in an internet search engine to find downloadable code lists.

Q: Can I use a universal remote with my Hitachi TV if it’s not listed in the code list?

A: It might still be possible to use a universal remote with your Hitachi TV even if it’s not listed in the code list. In such cases, you can try the code search method mentioned earlier. Additionally, some universal remotes offer a learning function where you can teach the remote the commands from your Hitachi TV’s original remote control.

Remember, the compatibility and functionality of universal remotes can vary, so it’s important to check the user manual and follow the instructions provided by the manufacturer for programming your specific model.

Leave a Comment