Craig TV’s Universal Remote Codes List – Unlock the Full Potential of Your Craig TV

Looking for universal remote codes for Craig TV? Look no further! Our comprehensive list of Craig TV universal remote codes is here to help you effortlessly control your Craig TV with any universal remote. Say goodbye to juggling multiple remotes and simplify your entertainment experience. Easily program your universal remote using our working codes, ensuring seamless compatibility and convenient access to all your favorite shows and channels. With our user-friendly guide, you’ll be able to set up your remote in no time, unlocking the full potential of your Craig TV. Enjoy hassle-free TV viewing and maximize your entertainment enjoyment with our  Craig TV universal remote codes.

Craig Tv’s Universal Remote codes

We also are providing some methods to program your favorite universal remote with this Craig tv, after finding the steps to program then use the codes to enter the program as per the methods. allow us to check the procedure too. You’ll program your cable or satellite universal remote to also control your Craig TV. Find your provider and remote within the list below and enter the TV code provided into the remote. Ask your cable or satellite provider for instructions.

craig tv's universal remote codes

Craig TV’s Universal Remote 4 Digit Codes List

  • 00073, 6222, 06222, 10180, 0073, 10073, 16222, 11822

Universal Remote For Craig Soundbar

  • 00161

Craig TV’s Universal Remote 3 Digit Codes List

  • 541, 536, 691, 662, 666, 667, 682, 009, 657, 669, 694, 532, 542, 533, 963, 038, 042, 053, 037, 161, 180, 282, 171, 064, 038, 064, 009

Craig TV’s Universal Remote 5 Digit Codes List

  • 10180, 13423, 10161, 19411, 11922

Program Instructions

By using the keycode we will easily program a Craig universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Craig TV Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Craig Remote Code

If you couldn’t find the key code which works for the device at that point you’ll found out your Craig universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

3) Manual Setup

  • Place the “Remote Control facing To The Universal remote you would like to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the functions which you would like to “program” as an example “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one of the lights will “blink” meaning it’s been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Craig tv and also for your favorite remote.


First of all, you’ve got to verify the name of your remote and then try all the universal remote codes which are mentioned within the above list one by one, you’ll use the methods to program your remote too, so why late start with any code until you get paired together with your Craig tv.


Q: What are Craig TV’s Universal Remote Codes?

Universal remote codes for Craig TV are a set of numeric or alphanumeric codes that allow you to program a universal remote control to operate your Craig TV. These codes enable you to control various functions of the TV, such as power, volume, channel selection, and input switching.

Q: How do I program a universal remote for my Craig TV?

Programming a universal remote for your Craig TV usually involves the following steps:

  • Turn on your Craig TV and the universal remote you want to program.
  • Refer to the universal remote’s user manual or instructions to find the code programming section.
  • Locate the Craig TV brand code list provided in the universal remote’s manual or online.
  • Enter the specific code corresponding to your Craig TV model using the universal remote’s keypad.
  • Test the remote by pressing various buttons to ensure it controls your Craig TV properly.

Q: Can I use any universal remote with Craig TV?

In most cases, yes. Craig TVs are compatible with a wide range of universal remote controls available in the market. However, it’s always advisable to check the universal remote’s compatibility list or consult the manufacturer’s instructions to ensure it supports Craig TVs.

Q: Where can I find the specific remote codes for my Craig TV model?

You can find the specific remote codes for your Craig TV model in the user manual that came with the universal remote control. The manual should include a list of codes for various TV brands, including Craig. Additionally, you can search for Craig TV remote codes online by specifying your TV model and the universal remote you are using.

Q: Are the remote codes different for different regions or countries?

In some cases, remote codes can vary based on regions or countries. It’s recommended to refer to the universal remote’s documentation or website for region-specific codes. Additionally, you can try using the universal remote’s code search function to automatically find the correct code for your specific Craig TV model.

Q: What should I do if none of the listed remote codes work for my Craig TV?

If none of the listed remote codes work for your Craig TV, you can try the following troubleshooting steps:

  • Double-check the code you entered to ensure accuracy.
  • Try searching for the code using the universal remote’s code search feature.
  • Contact the manufacturer of the universal remote for further assistance or alternative code options.
  • Consider using a different universal remote that explicitly supports Craig TVs.

Q: Can I control all the functions of my Craig TV with a universal remote?

A universal remote can typically control the basic functions of a Craig TV, such as power, volume, and channel selection. However, advanced features and settings may not be accessible through a universal remote. It’s best to consult the user manual of your Craig TV and the universal remote for a comprehensive understanding of the supported functions.

Q: Are there any alternative methods to program a universal remote for Craig TV?

Yes, there might be alternative methods to program a universal remote for Craig TV. Some remotes offer a code-scanning feature that automatically searches for the correct code. Additionally, certain universal remotes can be programmed using computer software or smartphone apps. Refer to the specific instructions provided with your universal remote for alternative programming methods.

Q: How can I reset the universal remote if I encounter any issues?

The process to reset a universal remote may vary depending on the brand and model. Generally, you can try the following steps:

  • Remove the batteries from the remote control.
  • Press and hold any button on the remote for about 10 seconds to discharge any remaining power.
  • Reinsert the batteries and try programming the remote again following

Leave a Comment