Hisense TV’s Universal Remote Codes and Program Instructions

For your Hisense TV, you’ll use the universal remote and therefore the codes are mentioned within the below-provided list. There are three-digit and also four-digit codes and more, so try one by one code from the below list until your device has been programmed with the universal remote.

Check also: Element Universal Remote Codes

Hisense TV’s Universal Remote Codes

First of all, we are getting to mention the universal remote codes list then we’ll provide three methods which are recommended to program your Hisense tv with the universal remote, you’ll any of these three methods. Then why late try below codes one by one.

Hisense 3 Digit Universal Remote Codes

  • 759

Hisense 4 Digit Universal Remote Codes

  • 0073, 0182, 0216, 0848, 0208, 0009, 0145, 0156, 0227, 0508, 0696, 0748, 0753, 0821, 1170, 0780.

Hisense 5 digit Universal Remote Codes

  • 12183, 10748, 11758.

if None of these codes worked from the above list then call this number 1-888-935-8880 to get the working code.

To Use Your Dish Remote On Your Hisense Tv:

  • 1-Turn on the TV and receiver.
  • 2-Use Dish remote and press and hold the clear TV button at the highest until all 4 lights illuminate.
  • 3-Press the red power button 1 time.
  • 4-Press the channel up button until the TV turns off.
  • 5-Press the pound button 1 time.
  • 6-Press the red power button until the TV turns off.

Hisense 5 digit Universal Remote Codes

Your Hisense TV is often controlled with a universal remote and work with RCA remotes, Comcast, Directv, Cox, and more.

1) Keycode

By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.

  • First, you would like to “Turn The Device On
  • Press the “TV” on your “Hisense Device Universal Remote
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat an equivalent procedure with the various code from an equivalent a part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn’t find the key code which works for the device at that point you’ll found out your universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode.

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three-digit) code
  • Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off

The above method might take some overtime but it’s vital to seek out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.

We hope this text was helpful to you and you’ll found the right universal remote code for your Hisense tv, now you’ll enjoy all of your favorite tv shows and the other programs with this single universal remote.

Check all: Universal Remote Codes

Leave a Comment