GPX DVD Player Universal Remote Codes & Instructions

Contents

If you’ve got a GPX DVD player and need to regulate it with a universal remote, we have the codes needed. A GPX DVD player is often controlled with any universal remote if you’ve got the right programming guide and therefore the correct remote codes. If the codes below don’t work together with your GPX DVD player, please leave a comment below with the model number of your remote and DVD player, and that we will find you the right remote code.

GPX DVD Player Universal Remote Codes

GPX has been an extended-time producer of Digital Audio Devices, home theatre Systems, Portable Audio Devices, Clock Radios, Televisions, Electronics, Karaoke Systems, Radios, DVD Home Theaters, and more. GTX equipment is understood for its top-quality products and therefore the remotes are not any different. The OEM remotes from GTX are solid and neat for the products they are available with. If you happen to interrupt a GPX remote or lose one among your remotes, Remotes.com may have the real OEM GPX remote replacement that you simply need.

GPX DVD Universal Remote codes

GPX DVD Player Universal Remote 4 Digit Codes

  • 0936
    0944
    2114
    2390

GPX DVD Player Universal Remote 4 Digit Codes

  • 2474, 2114, 2235, 2041, 0699, 0944, 0495, 3368, 3446, 4475, 4355, 0769, 2441, 0741, 2390, 0135, 4395, 4295, 2437, 4265, 0096, 2695, 2164, 0936, 0295, 4345

GPX DVD Player Universal Remote 3 Digit Codes

  • 826
    704
    098
    882

GPX DVD Player Universal Remote 5 Digit Codes

  • 22164
    51304
    20769
    54908
    22235
    20699

GPX DVD Player 4 Digit remote Programming Instructions

Using the code(s) provided above, program the remote directly using the subsequent steps.

  • Enter Setup Mode

Press and hold down the SETUP button on the remote until the red light on the remote activates. Release the SETUP button. The red light will remain on.

NOTE: The red light with either be a little light at the highest of the remote or the facility on/off button.

  • Press the device type button

Press and release the device button on the remote for the sort of device you would like to regulate. The red light will blink once and remain on.

NOTE: If there’s not a tool button on the remote for your sort of device, you’ll use any device button on the remote.

  • Enter the device code

Use the amount buttons on the remote to enter the primary code shown above. The red light will close up after entering the fourth digit.

  • Tests the results

Point the remote at the device. Test the buttons on the remote to ascertain if the device responds as you’d expect. If the buttons don’t operate the device, return to Step 1 above, and use subsequent code within the list.

  • Repeat this process for your other devices

Testing the Code for max Functionality:

  • Try a spread of the device’s functions with the remote. If some features of your devices don’t work, attend the subsequent step to undertake a special code.
  • Repeat the Manual Code Search from the start. When the device turns off for the primary time, don’t press the STOP key, which might store an equivalent code. Instead, with the unit now off, still press the facility key repeatedly until the unit turns back on.
  • Once the unit turns back on, you’ve got found another code that operates the device. Press the STOP key.
  • Test the key’s functionality again by trying a spread of functions. If the code controls the bulk of the device’s functions, programming is complete. If the code stored doesn’t give maximum functionality, try another code.

Leave a Comment