Contents
To use any of your favorite universal remotes for your Devant tv, you would like to program with the universal remote codes. The codes have been mentioned within the below lines and you’ll enter those codes in your device as per the below-mentioned steps. So try those codes like two-digit codes, three, four, and also five-digit codes.
Check also: RCA Universal Remote Codes
Devant tv’s Universal Remote Codes
Devant TV’s Universal Remote 3 Digit Codes List
- 024
023
Devant TV’s Universal Remote 4 Digit Codes List
- 0102, 0134, 0193, 0195, 0196, 0214, 0231, 0338, 0349, 0355, 0384, 0416, 0456, 0457, 0460, 0472, 0476, 0477, 0509, 0526
Devant TV’s Universal Remote 5 Digit Codes List
- 00001
- 00002
Program Instructions
Here are remote codes to use together with your Devant TV. Program Your Cable or Satellite remote to figure together with your Devant TV. you’ll program your cable or satellite universal remote to also control your Devant TV. ask your cable or satellite provider for instructions.
1) Keycode
By using the keycode we will easily program a Devant universal remote and therefore the keycode identifies the make and model of your equipment.
- First, you would like to “Turn The Device On”
- Press the “TV” on your “Devant TV Universal Remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
2) Programming Via Universal Devant Remote Code
If you couldn’t find the key code which works for the device at that point you’ll set up your Devant universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the (three-digit) code
- Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”
3) Manual Setup
- Place the “Remote Control facing To The Universal remote you would like to replace”
- Now press the “Setup Button” or “Magic”
- Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
- Now press any of the function which you would like to “program” as an example “TV Volume Up”
- Then press And hold the corresponding key on the “Original Remote Controller”
- Finally, one among the lights will “blink” meaning it’s been saved correctly
- Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
- We hope the above methods and therefore the codes are worked to program your Devant tv and also for your favorite remote.
Conclusion:
If your device still not programmed with the universal remote, then be happy to ask us your issue as a question and our experts will solve it as soon as possible, many thanks for visiting our blog, keep visiting our official site to urge updates whenever we post new articles.
Kiran Kotte is a 25 years old Youtuber. He is a tech geek and also codes sometimes. He writes on various topics like Technology, Blogging, Web designing, and SEO. He runs various other blogs under various niches.