There may be a different reason for Sony TV’s red Light Blinking 6 Times. The red LED light on your Sony TV flickering might be a small inconvenience at times. Sony TV Red Light Blinking 6 times suggests a fault with the backlight area of the main motherboard, inverter boards, or power board. This problem may also indicate that the inverter board has failed. A faulty power board might be causing this problem as well. According to Sony, this should not cause any damage.
Check also: Orion TV Universal Remote Codes
When the red light on a Sony TV blinks 6 times, it usually indicates an issue with the backlight. This could be caused by a problem with the backlight inverter board, a faulty LED driver, or a defective LED strip. Here are some steps you can take to troubleshoot the issue:
Table of Contents
How to fix Sony TV’s red Light Blinking 6 Times?
To solve Sony TV’s Red Light Blinking 6 Times, start by unplugging the power cord and making sure the cables are not tangled up in a loop. If that fails, consult an authorized Sony service technician or an authorized repair shop to repair this problem. Do not attempt to troubleshoot a blue LED light if you find yourself experiencing problems with your Sony TV Red Light Blinking 6 Times as it could lead to worse problems down the road.
What do you need to do?
STEP 1: Power cycle the TV. From standby mode, unplug the power cord from the wall socket. Then plug the power cord back in at once. Unplug and then re-plug again to power on your Sony TV without starting with Step 1.
STEP 2: If things still remain unchanged, turn off all connected devices like Blu-ray players, DVDs,s, etc, and disconnect all cables except one that is necessary for your Sony tvs such as a cable box or satellite receiver. Power on your Sony TV without starting with Step 2.
If step 2 fails to fix the problem, proceed to step 3.
STEP 3: If things still remain the same, check if all cables are connected properly and check the polarity of the power cord. Check the power cord for cuts or damage. Make sure you are not connecting any other external devices in this step, because you may get dangerous shocks. Power on your Sony TV without starting with Step 3.
If step 3 fails to fix the problem, proceed to step 4.
STEP 4: If the problem still remains the same and if you have purchased a new cable box, DVD player or any other device that is connected to your Sony TV then connect it for one hour and see if the problem gets solved or not. If this does not work go to the repair shop.
STEP 5: If you see a red light blinking and no power is on your Sony TV, then check the fuse and make sure it is working or not by using a voltage tester. A blown fuse is the most common reason for Sony TV Red Light Blinking 6 Times. Replace the blown fuse with your original one. Also, replace the fuse of all connected devices.
STEP 6: If nothing works out and you are still experiencing issues with your Sony TV Red Light Blinking 6 Times, then you need to contact an authorized technician from Sony Service Centre who can give you more assistance regarding this matter.
Certainly! Here are some frequently asked questions (FAQs) about Sony TV red light blinking 6 times, along with their corresponding answers:
Q: What does it mean when my Sony TV’s red light blinks 6 times?
A: When your Sony TV’s red light blinks 6 times, it usually indicates a problem with the backlight. This could be caused by a faulty backlight inverter board, a bad LED driver, or a defective LED strip.
Q: How do I fix my Sony TV when the red light blinks 6 times?
A: The specific steps to fix a Sony TV that’s blinking 6 times may vary depending on the model and the underlying cause of the issue. However, some possible solutions include checking the connections between the backlight inverter board and the mainboard, replacing the backlight inverter board, replacing the LED driver, or replacing the LED strips. It’s best to consult a professional technician or the Sony support team for guidance on how to fix your TV.
Q: Can I fix the 6 red light blinking issues on my Sony TV myself?
A: While it’s possible to fix the 6 red light blinking issue on your Sony TV yourself, it’s generally not recommended unless you have experience with electronics repair. Working on a TV can be dangerous and could cause further damage if you’re not careful. It’s best to consult a professional technician or contact the Sony support team for assistance.
Q: Is the 6 red light blinking issue covered under warranty?
A: If your Sony TV is still under warranty, the 6 red light blinking issue may be covered depending on the terms of the warranty. It’s best to check with Sony’s support team to see if your TV is eligible for warranty service.
Q: How can I prevent the 6 red light blinking issue from happening again?
A: There’s no guaranteed way to prevent the 6 red light blinking issue from happening again, but some best practices include avoiding power surges, keeping your TV well-ventilated to prevent overheating, and avoiding physical damage to the TV. You should also ensure that you’re using high-quality components and cables when connecting your TV to other devices.
Virat Raj is a Digital Marketing Practitioner & International Keynote Speaker currently living a digital nomad lifestyle. During his more than 10 years-long expertise in digital marketing, Virat Raj has been a marketing consultant, trainer, speaker, and author of “Learn Everyday yourself: In Pursuit of Learning” which has sold over 10,000 copies, worldwide.