How to reset the channels on a samsung tv: This is the question many Samsung TV owners are asking themselves. The reason they are doing so may be because a technician went in and changed them, or maybe because they accidentally changed something that’s making the picture look distorted or blurry, but typically it’s because you have no idea how to reset them back to their original state. Of course, this should not be a hard task if you just spend some time reading through these steps:
Check also: Samsung Smart TV Universal Remote Controls
Table of Contents
How to Reset The Channels on A Samsung TV?
1. Power off your tv: You’ve probably done this before turning it on since it was so difficult, but we are going to suppose that you didn’t know any better than to power it off by accident. Now, the reset procedure to take a look at will be a little bit different depending on your television model. Samsung TV owners, however, can always use the manual way of doing this as long as they are prepared to wait up to 15 seconds for it to reset.
2. Flip your tv face down on a flat surface. Now, you’re going to have to wait for up to 15 seconds before you can start resetting the channels back.
3. When it doesn’t take 15 seconds, use both hands and hold the power button for a few seconds until it shuts off completely. This should be followed immediately by another 5 seconds of holding the power button again.
4. Power on your television again and wait for it to catch up with what’s shown on the screen completely before going through step five of this article again when done.
5. Your gaming console or cable box will be completely reset to factory settings, so you’ll have to go through the same activation process all over again.
If you keep doing this for about a week then it should be enough time for the TV to reset itself to its original state. If this doesn’t work, try contacting Samsung support or taking your device in for repair at your local store.
Why is my Samsung TV unable to find channels?
It is common for an older TV to not be able to find a reception. And the reason for this is that the antenna and cable that connect your TV to your local provider are not functioning properly at this time. This will cause the channels you have been able to pick up on your television to look as if they’re all scrambled. When this happens, just try removing one or all of these with enough coaxial cable and then try turning it all back on again. You should have no problem receiving channels now.
Why is my Samsung TV not able to detect channels?
If your television is not able to pick up any channels, then it could be because you have a very weak signal or your cable provider’s box is not properly connected. Take the time to call them and find out if the reception for your provider’s antennae is out at all times. If this is the case, you might want to buy a different antenna yourself so that when you receive a new one, it will work in your area right away.
Check also: How to put Google Chrome on a Samsung Smart TV?
Way to reset the channels on a Samsung tv
1. The first step is to tune in to the channel that you want to reset and then switch over to the cable company’s digital signal.
2. Next, go into your settings and scroll down through the options until you reach “Channel Settings.” Select this option, and then change your preferences to what they were originally when you had service before.
3. Mouse right on “Timers” and press “OK,” this will bring up a window with what is known as timers where you can go through each channel and choose which one you want to reset back to the default settings of when your cable service was getting in your information.
4. After you have selected the channels that you wish to reset, press the “OK” button on your remote or the “settings” button on your remote control until you see this prompt. Now, all you have to do is press the “yes” button on your remote.
5. When it has completed this action, you can either wait a few seconds and then restart your device which will start over what it was originally before the channels were changed, or go ahead and turn off your tv completely and then turn it back on using the power button once again.
6. One of the most common questions that people ask about resetting the channels on a Samsung TV is why this does not seem to work. But if you want to make sure that the remote works with your television, go ahead and try using the “reset all” button on your remote next time when resetting the channels.
Check also: How to fix Samsung TV Internet & Wi-Fi Connection Problems
Is a Reset Button Available on a Samsung TV?
The answer to this question is no, and it is a little bit of a problem for people that are trying to reset the device themselves. If you are going to be one of these people then you will want to try pressing the power button on your television because this is the best way that I’ve seen of resetting a Samsung TV back to its original state. If you happen to own a Samsung television, then you’ll know that you have an option of a “reset menu” which is what we are about to explain next because this is the basic method of resetting all of the channels on your Samsung TV.
Final Verdict
Pressing the power button on your set should be enough for you to reset everything back to the way it was so let’s see if that works. If that doesn’t work, then you have to go through the process of making a phone call and waiting for somebody to come out and fix it. So hopefully, this article gave you everything that you needed in order to know how to reset the channels on a Samsung TV so that you do not have to wait for anything else.
Virat Raj is a Digital Marketing Practitioner & International Keynote Speaker currently living a digital nomad lifestyle. During his more than 10 years-long expertise in digital marketing, Virat Raj has been a marketing consultant, trainer, speaker, and author of “Learn Everyday yourself: In Pursuit of Learning” which has sold over 10,000 copies, worldwide.