Goldstar Tv’s Universal Remote Codes and Program Instructions

If you’re using the Goldstar tv then you would like to use the below gold star tv universal remote codes, these codes are often programmed together with your tv and can work perfectly. So why late just check the codes one by one and be programmed together with your tv and universal remote and therefore the codes are often used with all universal remotes if your remote needs a 4 digit code.

Check also: RCA Universal Remote Codes

Goldstar Tv’s Universal Remote codes

Goldstar Tv’s Universal Remote Codes For RCA

• 027, 172, 1124, 1155, 005, 018, 155, 077, 10178, 003, 1089, 1123, 1207, 012, 1065, 1083, 004, 1093, 1118, 156, 058, 1046, 1078, 196, 008, 1156, 1196, 1005, 006, 1082, 057, 050, 037, 1058, 1025, 1057, 056, 1056, 1009, 1014, 011, 082, 019, 1004, 0178, 089, 1006, 094, 1172, 1117, 1019, 0030, 1171, 1012, 1205, 171, 1013

Goldstar Tv’s Universal Remote 4 Digit Codes List

• 0037, 0178, 0556, 0714, 0361, 0109, 0606, 0715, 0009, 0370, 0163, 0455, 0004, 0005, 0227, 0338, 0012, 0057, 0080, 0156, 0001, 0251, 0611, 0761, 0931, 1181, 1221, 1501, 1911, 4731, 0030, 0178, 0019, 0056, 1041, 1042, 1043, 1046, 1047, 1049, 1290, 1314, 1359, 1442, 1004, 1005, 1011, 1018, 1050, 1061, 1090, 1091, 1097, 1098, 1400, 1401, 1006, 1012, 1019, 1056, 1057, 1058, 1082, 1155, 1156, 1171, 1172, 1196, 0002, 0502, 0102, 0324, 0435, 0802, 0307, 0609, 0217, 5005, 5006, 5010, 5011, 5013, 5014, 5018, 5020, 5052, 5106, 5151, 5152, 5155, 5197, 5213, 5264, 5309, 5316, 1089, 1093, 1009, 1013, 1014, 1025, 1065, 1078, 1083, 1117, 1118, 1123, 1124, 1205, 1207

Goldstar Tv’s Universal Remote 3 Digit Codes List

• 505, 526, 523, 545, 546, 566, 573, 652, 654, 627, 722, 520, 506, 655, 653, 564, 658, 702, 718, 720, 656, 219, 588, 693, 004, 005, 009, 012, 056, 057, 080, 133, 155, 156, 172, 227, 338, 006, 019, 058, 171, 082, 196, 060, 001, 002, 030, 032, 039, 106, 178, 037, 377, 042, 043, 109, 072, 003, 011, 027, 050, 008, 018, 077, 089, 094

Goldstar Tv’s Universal Remote 5 Digit Codes List

• 10178, 10030, 10002, 10019, 1032, 10001, 10032, 10039, 10056, 10409, 11926, 11032, 10005, 12501, 16105, 12210, 17342, 17608, 19307, 11818, 15010, 19114, 12248, 12268, 12269, 12270, 12271, 12284

Program Instructions

Use the subsequent directions to program your VIZIO Universal remote to use together with your GOLDSTAR TV/VCR Combos device.

• Manually activate your TV (or device you would like to control)
• Press the TV (or device) button and hold for five seconds until the LED flashes twice. LED will remain lit.
• Enter one among the programming codes from the list 0227 0338 for your GOLDSTAR TV/VCR Combos device. Enter it using the amount Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is then turned off.
• Point the VIZIO remote at the device and press the ability button. If the device powers off, setup is complete. If not, repeat steps with a special code.

1) Keycode

By using the keycode we will easily program a Goldstar tv with any of your favorite universal remote and therefore the keycode identifies the make and model of your equipment.

• First, you would like to “Turn The Device On”
• Press the “TV” on your “Goldstar TV Universal Remote”
• Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
• Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
• Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
• You can release the “Power Button” whenever the screen switches off

2) Programming Via Universal Goldstar Remote Code

If you couldn’t find the key code which works for the device at that point you’ll set up your Goldstar universal remote to look mode for the right one. Its a code within the manual which forces the remote into the search mode

• First of all “Turn The Device On”
• Now press and hold the “Setup” button
• Enter the (three-digit) code
• Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”

3) Manual Setup

• Place the “Remote Control facing To The Universal remote you would like to replace”
• Now press the “Setup Button” or “Magic”
• Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you would like to “program” as an example “TV Volume Up”
• Then press And hold the corresponding key on the “Original Remote Controller”
• Finally, one among the lights will “blink” meaning it’s been saved correctly
• Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.

We hope the above methods and therefore the codes are worked to program your Goldstar tv and also for your favorite remote.

Conclusion

We have mentioned all the methods and also all the universal remote codes, just you would like to enter the code as per the above-mentioned methods and therefore the device is going to be programmed with the remote.