Universal Remote Codes for Cable Box

Here is that the list with the KNOWN working device codes for cable boxes. These should work with ANY remote as these remote codes are universal. Make certain you check out the maker of the cable or SAT box when checking out remote code. You ought to use the maker of the box to search out the remote code first, if that code doesn’t work then choose your cable company and use those remote codes.

Yes, we do! Since remote codes vary by TV, please click on the suitable link below that correlates together with your remote. Then click on click “Code Finder” below the image of the remote. you’ll then be taken to the page which will walk you through programming your remote.

Universal Remote Codes For Cable Box List

CableOne is merely ready to provide you with support for the remotes that we provide to you. If you’ve got your own remote that’s unlisted below, please ask the remotes manufacture for the remote codes.

If your household is beginning to be overwhelmed by the number of remotes you’ve got, then it’s going to be time to take a position during a universal remote. Nowadays, there are remotes for everything; the TV, the cable box, DVR, DVD player, music players and more. Each of those devices usually comes with its own remote. So it’s pretty easy to urge confused about which remote controls what.

How to program a remote by manually enter codes

• Remove the battery cover and batteries from the GE universal remote. You’ll find a persist with the model number; note whether it’s version 1 (V1), V2, V3, or V4.
• Download the list of codes for your model from the Jasco website. Use the code for the device you’re using.
• Turn on the device you’re programming (TV, DVD player, DVR, etc.).
• Hold the SETUP button for four seconds until the indicator light illuminates red.
• Press the corresponding device button, counting on which device you’re programming currently.
• Enter the code. It are often either 3-digits or 4-digits. If you’ve entered the right code, the indicator light should close up.
• Press the facility button. If the device turns off, you’ve successfully programmed that device into the remote.

How to program a remote using the code search feature

• Find the version number of your GE universal remote (same instructions as step 1 above).
• Turn on the device you would like to program into the remote first.
• Hold down the SETUP button for four seconds then press the corresponding device button.
• Press the facility button and await the device to show off. If you’ve got a V2, V3, or V4 remote and are programming a DVD player, press PLAY and await the device to start playing.
• After two seconds, press the POWER/PLAY button again. The device should close up. If it doesn’t, repeat until the device turns off. V2, V3, and V4 remotes don’t need for you to continue pressing the button; the remote will automatically send the command every two seconds.
• Press the ENTER or OK button on a V1 remote to lock within the code. Press the numeral “1” button within two seconds to lock during a code for a V2, V3, or V4 remote. The indicator light should close up if you’ve successfully entered the code.