Bose Universal Remote Codes & Instructions guide

There are many other ways counting on the Bose system you’ve got. Below are 2 methods to manage your BOSE remote to figure together with your TV. The Bose system uses standard Bose IR codes that are available in many cable set-top box remotes and other universal remote controls. ask the owner’s manual for your remote to seek out programming instructions and codes. The Bose system’s remote may be a universal remote which will control many devices.

Check also: Universal Remote Codes For BOSE Home Theater

Bose Universal Remote Codes

LG TV Remote Codes List  For BOSE Universal Remote

• 11768
• 11842
• 12182
• 12358
• 12424
• 12731
• 12834
• 10017
• 10030
• 10037
• 10109
• 10163
• 10178
• 10361
• 10370
• 10856
• 11178
• 11265
• 11423
• 11447
• 11663
• 10556
• 10698
• 10714
• 10715

GE Universal Remote Codes For Bose TV’s

• 0672

Vizio TV Remote Codes List For BOSE Universal Remote

• 11756
• 11758
• 10054
• 10864
• 10885

Samsung TV Remote Codes List For BOSE Universal Remote

• 11060
• 11235
• 11249
• 11312
• 11458
• 10030
• 10037
• 10163
• 10178
• 10370
• 10519
• 10556
• 10618
• 10650
• 11584
• 11619
• 11630
• 11903
• 12051
• 12094
• 10702
• 10812

How to program Bose universal Remote

1. Activate both the 3•2•1 system and your TV.
2. Press and hold the Program and television On/Off buttons (shown on the left) for 3 seconds. The remote Source buttons will light to signal that you simply have entered programming mode.
3. Use the number of keys to enter your TV’s four-digit setup code.
4. Press Program once to finish programming. The remote will flash once to point successful programming. To verify that, use the remote to show your TV on and off or change channels.

To control the cable/satellite box

1. Activate both the 3•2•1 system and your cable/satellite box.
2. Press and hold the Program and Guide buttons (shown on the left) for 3 seconds. The remote source buttons will light to signal that you simply have entered programming mode.
3. Use the amount keys to enter your cable/satellite box’s four-digit setup code.
4. Press Program once to finish programming.

The remote will flash once to point successful programming. To verify that, use the remote to vary cable/satellite channels.