Are you using an Onkyo device and would you wish to work with the universal remote then why late you only got to know the codes and also the procedure to program your remote together with your device? Here we’ve mentioned the codes and also the best methods to program. So let’s get a check.
Check also; Onkyo Blu-Ray Universal Remote Codes
If you trying to regulate your Onkyo with a universal remote, here are the remote codes to work your Onkyo. If the primary codes don’t work, keep trying the numbers down the list. The remote codes list contains ONKYO tuner codes, amplifier codes, DVD codes, and misc audio codes.
Onkyo produces a range of universal remote controls that are designed to work with a variety of devices, including TVs, DVD players, and home theater systems. Here is a full guide on how to use an Onkyo universal remote:
- Determine the code for your device: Before you can use your Onkyo universal remote, you need to determine the code for the device you want to control. The code will be a series of numbers that you enter into the remote to establish communication with the device. You can find the code for your device in the manual that came with your Onkyo remote, or you can search for it online.
- Turn on the device you want to control: Make sure the device you want to control is turned on and that it’s within range of the Onkyo remote.
- Press and hold the “Setup” button: The Setup button is typically located near the top of the Onkyo remote. Hold down the button until the LED light on the remote turns on.
- Enter the code for your device: Use the number keys on the remote to enter the code for your device. The LED light on the remote should blink twice after you enter the code.
- Test the remote: Once you’ve entered the code for your device, test the remote to see if it’s working properly. Try using the remote to turn the device on and off, change channels, or adjust the volume.
- Program additional devices: If you want to control more than one device with your Onkyo remote, repeat the process above for each device.
- Customize the remote: Onkyo universal remotes often come with customizable buttons that allow you to program specific functions for your favorite devices. To customize the remote, follow the instructions in the manual that came with the remote.
That’s it! With these simple steps, you should be able to use your Onkyo universal remote to control all of your favorite devices.
Table of Contents
Onkyo Universal Remote Codes List
Onkyo Receiver Tuner Universal Codes
- 5077, 5078, 5079, 5080, 5081, 5002, 5018, 5073, 5074, 5075, 5076
Onkyo Amplifier Universal Codes
- 6017, 6054, 6056, 6005, 6006
Onkyo Audio Universal Codes
- 4004, 4016, 4017
Onkyo DVD Universal Codes
- 2220, 2318, 2410, 2006, 2219
How to Program
By using the keycode we will easily program a universal remote and therefore the keycode identifies the make and model of your equipment.
- First, you would like to “Turn The Device On”
- Press the “TV” on your “Universal Remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
That’s all, your TV will work perfectly now with the universal remote if your device isn’t working then attempt to repeat an equivalent procedure with the various code from an equivalent part of the reference table.
If you couldn’t find the key code which works for the device at that point you’ll set up your universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the (three-digit) code
- Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”
The above method might take some overtime but it’s vital to seek out your key code. Once you’ve got done the above procedure your remote should be working for all the functions.
If the above two methods can’t help you then the ultimate method is “Manual Setup”, if you configure the universal remote manually your device can work perfectly.
- Place the “Remote Control facing To The Universal remote you would like to replace”
- Now press the “Setup Button” or “Magic”
- Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
- Now press any of the functions which you would like to “program” as an example “TV Volume Up”
- Then press And hold the corresponding key on the “Original Remote Controller”
- Finally, one of the lights will “blink” meaning it’s been saved correctly
- Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
You have to repeat all the buttons to program, once you’ve got done all the functions which you would like and eventually press the “Setup Button” Again to end the session.
FAQs
Here are some frequently asked questions and answers related to Onkyo universal remote codes:
Q: What are Onkyo universal remote codes?
A: Onkyo universal remote codes are a series of numbers that are used to program the remote control to operate specific devices, such as TVs, DVD players, and cable boxes.
Q: How do I find the Onkyo remote code for my device?
A: You can find the code for your device in the manual that came with your Onkyo remote, or you can search for it online. Alternatively, you can try using the automatic code search function on your remote to find the code.
Q: What if the Onkyo remote code for my device doesn’t work?
A: If the code you entered doesn’t work, try entering a different code from the list provided in the manual or search for a different code online. If none of the codes work, try using the automatic code search function on your remote.
Q: Can I program multiple devices with one Onkyo universal remote?
A: Yes, you can program multiple devices with one Onkyo universal remote. Simply follow the instructions for programming each device separately.
Q: Can I customize the buttons on my Onkyo universal remote?
A: Yes, many Onkyo universal remotes come with customizable buttons that allow you to program specific functions for your favorite devices. Follow the instructions in the manual that came with the remote to customize the buttons.
Q: What should I do if my Onkyo universal remote stops working?
A: If your Onkyo universal remote stops working, try replacing the batteries first. If that doesn’t work, try reprogramming the remote using the instructions in the manual. If the remote still doesn’t work, contact Onkyo customer support for further assistance.
Kiran Kotte is a 25 years old Youtuber. He is a tech geek and also codes sometimes. He writes on various topics like Technology, Blogging, Web designing, and SEO. He runs various other blogs under various niches.