Viewsonic tv universal remote codes list: Are you checking out the three or 4 or 5 digit codes for your favorite universal remote which must operate your Viewsonic tv then here you’ll get all kinds of universal remote codes. These codes also can be used for your existing CABLE or SAT remote too if your program method is correct. Now we are getting to mention all the codes which can be performed on your remote and permit your tv to work, to program your remote we even have the methods, so check them too if you would like some assistance.
Check also: All TV’s Universal Remote codes
Table of Contents
Viewsonic Universal Remote Codes
ViewSonic TV Universal Remote 4 Digit Codes List
- 1588, 2111, 1627, 1542, 3791, 4938, 4319, 2014, 2049, 0724, 0864, 0046, 0072, 1014, 1144, 1019, 0074, 1016, 0198, 1024, 0168, 0177, 1025, 1026, 0050, 5301, 0501, 1981, 3751, 3801, 4281, 1171, 1411, 1755, 0797, 0857, 0885, 1330, 1342, 1578, 1087, 1088, 1089, 0054, 1454, 0690, 1154, 0586, 0221, 0391, 1937, 0379, 1535, 1040, 0039, 0333, 0565, 0225, 0542, 0067, 0864, 0117, 0373, 0404, 0802, 0039, 0230, 0586, 0067, 0268, 0221, 1090, 1091, 1092, 1093, 1094, 1095, 1103, 1216, 1232, 1340, 1410, 1413, 1414, 1441, 1361, 1489, 1495, 1038, 1149, 1180, 1181, 1182, 1183, 1184, 1185, 1186, 1187, 1188, 1189, 1190, 1205, 1206, 1179, 1050, 1242, 1519, 0206, 0808, 1003, 5066, 5108, 5109, 5115, 5138, 5188, 5342, 5377, 5469, 1070, 1742, 2087, 1037, 1142, 1200, 1227, 1365, 1640, 2277
ViewSonic TV Universal Remote 5 Digit Codes List
- 12014, 12087, 13706, 10864, 11330, 11627, 11755, 12049, 12277, 10885, 11564, 11578, 11742, 12101, 11365, 10724, 10775, 10797, 10857, 11342, 11640, 11542, 12111, 12745, 13055, 19813, 17263, 17535, 14868, 12846, 15004, 18035, 10054,
ViewSonic TV Universal Remote 3 Digit Codes List
- 566, 760, 818, 507, 600, 551, 562, 620, 741, 552, 581, 065, 056, 043, 017, 575, 548, 579, 796, 582, 710, 583, 721, 766, 123, 008, 118, 526, 121, 155, 187, 235, 046, 072, 041, 071
How to Program ViewSonic TV Universal Remote?
1) Keycode
By using the keycode we will easily program a ViewSonic TV universal remote and therefore the keycode identifies the make and model of your equipment.
- First, you would like to “Turn The Device On”
- Press the “TV” on your “ViewSonic TV Universal Remote”
- Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it’s in “Learning mode”)
- Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
- Once you’ve done this procedure, just “point your remote at the TV” then “Press And Hold The Power” button
- You can release the “Power Button” whenever the screen switches off
2) Programming Via Universal ViewSonic TV Remote Code
If you couldn’t find the key code which works for the device at that point you’ll found out your ViewSonic TV universal remote to look mode for the right one. Its a code within the manual that forces the remote into the search mode
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three-digit) code
- Now hold down the “Power Button” on the remote then press the Channel up them until the device during this case your tv “Turns Off”
3) Manual Setup
- Place the “Remote Control facing To The Universal remote you would like to replace”
- Now press the “Setup Button” or “Magic”
- Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
- Now press any of the functions which you would like to “program” as an example “TV Volume Up”
- Then press And hold the corresponding key on the “Original Remote Controller”
- Finally, one of the lights will “blink” meaning it’s been saved correctly
- Now your “TV Volume Up” button has been saved to the Universal remote and you’ll use the quantity button.
We hope the above methods and therefore the codes are worked to program your ViewSonic TV and also for your favorite remote. Those methods are used for ViewSonic TV remote setup.
Check also: Philips Blu-Ray Universal Remote Codes
Conclusion
If you are feeling good about this article then please give us feedback, it’ll give us a lift up to enhance our site and to succeed in many aspirants who are expecting their remote codes, we also accept new Viewsonic universal remote codes that are working for you, please leave those codes within the below comment section we’ll forward them to the opposite users too by posting them in our site.
Kiran Kotte is a 25 years old Youtuber. He is a tech geek and also codes sometimes. He writes on various topics like Technology, Blogging, Web designing, and SEO. He runs various other blogs under various niches.