Projector Universal Remote Codes

Program Universal Projector Remote Controls. If you’re using these universal remote controls then you have simple programing methods along with their codes too. So once you check the codes which are mentioned below and then follow the methods to program them.

Projector Universal Remote Codes List

Brand NameRemote Codes
A+K1144
ACER11231, 14344
ASK11213, 11232
BENQ11132, 14411, 14434, 14441
BOXLIGHT11122, 11211, 11224, 11333, 11411, 12123, 12124, 12324, 12424, 12431
CANON11133, 21131
CASIO1121
COMPAQ1334
DELL11134, 14232, 14233
DUKANE11122, 11411, 11413, 12242, 12341, 13324, 13414, 13421
EIKI1421
EIZO1144
EPSON11111, 11233, 12131, 12132, 12331, 12332, 13132, 13133
GRT WALL4412
HITACHI11122, 11234, 11411, 11412, 11413, 12133, 12134, 12141, 12231, 12232, 12233, 12333, 12334, 12341, 12432, 12433, 12434, 13134, 13141, 13142, 13143, 13241, 13242, 13323, 13324, 13331, 13414, 13421, 13422, 13441, 13442, 14114, 14121, 14122, 14123
HP11141
INFOCUS11121, 11213, 11313, 14443
JVC11142, 11241, 11414, 12144, 12234, 14133, 14134
KINDERMAN14422, 14423, 14424, 14431, 14432
LG11242, 12241, 12441, 14234, 14133, 14133, 14133, 14133
MITSUBISHI11143, 11144, 21132
NEC11144, 21111, 14133, 14133, 14133, 14133, 14133, 14133
OPTOMA11112, 11344, 14414, 14444
PANASONIC11114, 11243, 11321, 11331, 12113, 12114, 12121, 12222, 12223, 12224, 12321, 12322, 12323, 12421, 12422, 12423, 13122, 13123, 13124, 13231, 13232, 13233, 13234, 13311, 13312, 13313, 13411, 13412, 13413, 13434, 14112, 14113, 14341, 14342, 14343,
PHILIPS11223
PIONEER11212
PLUS11332
POLAROID11411
POLYVISION14421
PROMETHEAN21112, 21113
PROXIMA11213, 21114
SAMSUNG11131, 12112, 12314, 13223, 13224, 14144, 14211
SANWA13221
SANYO11214, 11224, 11244, 11322, 11421, 11422, 11423, 12122, 12123, 12124, 12142, 12143, 12242, 12324, 12424, 12431, 13144, 13211, 13423, 13424, 14241, 14242, 14243,
SHARP11123, 11311, 11323, 11443, 11444, 12111, 12213, 12214, 12221, 12244, 12311, 12312, 12313, 12411, 12412, 12413, 12414, 13112, 13113, 13114, 13121, 13131, 13212, 13213, 13214, 13222, 13314, 13321, 13322, 13342, 13343, 13344, 13431, 13432, 13433, 13443, 13444, 14111, 14124, 14131, 14132, 14141, 14142, 14143, 14223, 14224, 14231, 14331, 14332, 14333, 14334
SMART11341, 11342, 11343
SONY11113, 11312, 11424, 11431, 11432, 12211, 12212, 12243, 12342, 12343, 12344, 12442, 12443, 13243, 13244, 13332, 13333, 14212, 14213, 14214, 14244, 14311
TOSHIBA11221, 11313, 11324, 11433, 11434, 11441, 12444, 13111, 13334, 13341, 14312, 14313, 14314, 14321
VIEWSONIC11122, 11411, 11413, 12341, 13324, 13414, 13421, 21122, 21123, 21124
VIVITEK11124
YAMAHA11222, 11314, 11442, 14221, 14222, 14322, 14323, 14324

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First, you need to “Turn The Device On
  • Press the “TV” on your “Universal Projector Remote Control
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  • Finally, enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

If you couldn’t find the key code which works for the device at that time you can set up your universal remote to search mode for the correct one. Its a code in the manual which forces the remote into the search mode

  • First of all “Turn The Device On
  • Now press and hold the “Setup” button
  • Enter the (three-digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the functions.

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly.

  • Place the “Remote Control facing To The Universal remote control you want to replace
  • Now press the “Setup Button” or “Magic
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up
  • Then press And hold the corresponding key on the “Original Remote Controller
  • Finally, one of the lights will “blink” that means it has been saved correctly
  • Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done all the functions which you want and finally press the “Setup Button” Again to finish the session.

Conclusion:

If you need any assistance from us regarding any kind of universal remote codes then please contact us and we will give a better suggestion and resolve your issue as soon as possible. Keep visiting to get more updated universal remote codes.

Leave a Comment