Contents
Dynex is one of the popular Television brands in the market. Usually, the Dynex TV comes with a remote. But if for any reason you misplace your Dynex TV remote or it got spoilt, you’ll use a universal remote to program the TV.
Check out: Universal Remote Codes
Dynex Universal Remote Codes
Also, there’s a desire to grasp the way to program your universal remote to figure along with your Dynex TV before you’ll use the code. This post provides a guide on the way to program a Dynex TV with a universal remote.
Check also: RCA Universal Remote Codes
Dynex 3 Digit Universal TV Remote Codes
333, 603, 221, 115, 503, 666, 800, 120, 650, 844, 724, 200, 720, 001, 538, 533, 834, 632, 256, 583, 585, 701, 706, 698, 726, 500, 220, 908, 587
Dynex 4 Digit Universal TV Remote Codes
1171, 0135, 1718, 0115, 5421, 3141, 3161, 0371, 2891, 1040, 1181, 2049, 2184, 1463, 5311
Dynex 5 Digit Universal Remote Codes
11785, 11810, 12288, 11631, 13700, 10463, 10154, 10236, 10463, 12049, 12184, 11463, 11780, 18924, 13153, 11435, 10180, 10178, 10171, 10623, 11963, 10096,
How to Program Dynex TV With Universal Remote
Use the subsequent directions to program your DYNEX TV (including LCD, LED, and Plasma) device
- Step 1: Turn on the TV.
- Step 2: Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
- Step 3: With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
- Step 4: Verify by pressing the quantity + button. This could turn the TV VOLUME up.
- Step 5: Press the TV button to store the three, 4, or 5 digit code. The button will blink twice to verify the code is stored.
Make sure to attach and power on all the Dynex tv or other device you would like to line up using Dynex universal remote codes. Next, confirm the batteries are working in the scepter universal remote. Note the Dynex universal remote codes from the list provided. Nothing is more frustrating to seek out that you simply haven’t connected or universal remote batteries are bad after spending your evening trying to program Dynex universal remote.
Check also: New Blackweb Universal Remote Codes